Product Features; Technical Data - Bosch PTD 1 Manual Original

OBJ_BUCH-1625-003.book Page 12 Wednesday, September 7, 2016 11:24 AM
12 | English

Product Features

The numbering of the product features shown refers to the il-
lustration of the measuring tool on the graphic page.
1 Humidity and temperature sensor
2 Reception lens for infrared radiation
3 Exit opening for laser beam
4 Measuring button
5 Battery lid
6 Latch of battery lid
7 Laser warning label
8 Signal LED
9 Display
10 Thermal-bridge-mode button
11 Surface-temperature-mode button
12 Mould-warning-mode button
13 On/Off button
14 Emissivity degree button
15 Laser viewing glasses*
16 Protective pouch
17 Serial number
* The accessories illustrated or described are not included as
standard delivery.
Display Elements
a Measured value of the ambient temperature
b Measured value of the relative humidity
c Dew point temperature
d Symbol for relative humidity
e Symbol for ambient temperature
f Symbol for dew point temperature
g Emissivity degree
h Symbol for surface temperature
i Mould-warning-mode indicator
j Thermal-bridge-mode indicator
k Surface-temperature-mode indicator
l Measured value of the surface temperature
m "HOLD" indicator
n Unit of measure for temperature measurements
o Error warning
p Battery low indicator

Technical Data

Thermo detector
Article number
Measuring range
– Surface temperature
– Ambient temperature
– Relative humidity
1 609 92A 1YH | (7.9.16)
Thermo detector
Measuring accuracy (typical)
Surface temperature
– <+10 °C
– +10...30 °C
– +30...90 °C
– >+90 °C
Ambient temperature
– typically
Relative humidity
– <20 %
– 20...60 %
– 60...90 %
Optic (relation of measuring distance :
measuring spot)
Operating temperature
Storage temperature
Laser class
Laser type (typically)
Laser beam diameter (at 25 °C),
approx.
– at 0 m distance
– at 10 m distance
Batteries
Rechargeable batteries
Operating time, approx.
Weight according to
EPTA-Procedure 01:2014
Dimensions (length x width x height)
The measuring tool can be clearly identified with the serial
number 17 on the type plate.
1) At a measuring distance of 0.75–1.25 m to the surface
2) At an ambient temperature of 22 °C
3) Information according to VDI/VDE 3511 Page 4.3 (publication date:
July 2005); applies for 90 % of the measuring signal.
Deviations of the measuring results are possible in all ranges beyond the
indicated dimensions in the Technical Data.
4) Refers to infrared measurement, see graphic:
0,17 m
PTD 1
3 603 F83 000
–20...+200 °C
–10...+40 °C
10...90 %
5) The width of the laser line depends on the surface characteristics and
on the ambient conditions.
1) 2)
2)
3) 4)
–10...+40 °C
–20...+70 °C
635 nm, <1 mW
2 x 1.5 V LR06 (AA)
2 x 1.2 V HR06 (AA)
124 x 53 x 180 mm
1 m
Bosch Power Tools
PTD 1
±3 °C
±1 °C
±3 °C
±5 %
±1 °C
±3 %
±2 %
±3 %
10 : 1
2
5)
4 mm
5)
10 mm
9 h
0.28 kg