(a) S R TEMP. B J (LOW BROIL)
During LOW BROIL, the top and bottom heater lights cycle ON and OFF
PRE-PROGR MMED LOW BROIL SELECTIONS INCLUDE:
Chicken parts
Duck, turkey and other poultry can also be broiled with this function.
1. PRESS
to turn the unit on.
2. PRESS (a) S R (BROIL). BROIL HIGH appears on the display.
3. To select LOW broil for chicken and other poultry, PRESS (-) then PRESS
S-SELECCION R (SET).
4. To accept pre-programmed cooking time displayed, PRESS (a) S R (BROIL)
or INICI R/DETENER (ST RT/STOP) to start broiling.
5. To adjust cooking time, press (+) (-) until desired time appears on the display.
6. PRESS (a) S R (BROIL) or INICI R/DETENER (ST RT/STOP) to initiate cycle.
41
PROGR M R
PRE-PROGR MMED SELECTIONS INCLUDE:
Meat
Fish
Poultry
Dessert
Baked Goods
Casserole
Use the ConvertMenu™ function to cook just about any recipe that includes
cooking directions or to cook pre-packaged foods. The InfraWave™ Speed Oven
cooking time will appear on the display right after you enter recipe or package
cooking instructions.
EX MPLE
To cook pre-packaged frozen lasagna:
- Choose casserole from ConvertMenu™ selections. Press S-SELECCION R (SET).
- Using (+) (-), enter pre-packaged cooking temperature of 375° F. Press
S-SELECCION R (SET).
- Using (+) (-), enter pre-packaged cooking time of 40 minutes. Press
INICI R/DETENER (ST RT/STOP) or ConvertMenu
- Cooking time is converted to Infrawave™ Speed Oven cooking time of only
25 minutes! nd there's no need to pre-heat!
1. PRESS
to turn unit on.
2. PRESS PROGR M R (ConvertMenu
3. To select food type to cook, PRESS (+) (-) until your selection appears on the
display, then PRESS S-SELECCION R (SET). Pre-programmed temperature
of "350°F" appears on the display.
4. To enter the temperature of your recipe, PRESS (+) (-) then PRESS
S-SELECCION R (SET). The pre-programmed cooking time appears
on the display.
5. To accept pre-programmed cooking time, PRESS PROGR M R
(ConvertMenu
) or INICI R/DETENER (ST RT/STOP). NEW TIME
™
appears on the display.
6. To adjust cooking time, PRESS (+) (-) until desired time appears on the display.
7. PRESS PROGR M R (ConvertMenu
to initiate cycle. The new time appears on the display.
.
™
).
™
) or INICI R/DETENER (ST RT/STOP)
™
42