Shelving Configurations - AGA marvel ML24BCG0 Instrucciones De Instalación, Operación Y Mantenimient

Loading Tips and Suggestions
Your beverage center is equipped with a cantilever shelf
system which provides maximum adjust ability and custom-
izing of the shelving arrangements listed below.
Beverage center:
24" (61 cm) Wide Models:
Shown with a glass door. Figure 12.
(2) perforated metal
cantilever shelves.
(See Figure 13).
To Add or Remove a Shelf
Remove stored product from the shelf. Do not try to remove
a loaded shelf from the beverage center. Grasp the shelf
front with both hands, rotate the front upward and lift out.
(See Figure 14). To install a shelf insert the shelf in the ap-
pliance and insert the top hooks into the shelf support slots
and drop the shelf down so the hooks drop over the bottom
of the slots.
CAUTION
!
Make sure your cantilever shelf is secure on the shelf sup-
ports by pressing down on the shelf before loading.
CAUTION
!
Never try to move a loaded shelf, remove everything from
the shelf before moving. Use both hands when moving the
shelf.

SHELVING CONFIGURATIONS

Figure12
Rear tang
(hook) on
shelf
9
Figure 13
Perforated metal shelf
Installed shelf
tang
Figure 14a
Shelf support
slot
Figure 14