Purple
The Parrot PARTY is charging, but can still be
used.
Blue
The Parrot PARTY is in active mode.
Flashing quickly
The meanings
Flashing slowly
are the same,
regardless of
the LED colour.
Bright
Weak
LED off
The Parrot PARTY is switched off.
> Use the ON/OFF switch on the back of the
device.
Or
The Parrot PARTY is in power saver mode.
> Start the connection from your audio player or
press any button.
1
CONNECTING ThE P
An audio player is the device you use to store your music files
and start playing these files. An audio player can therefore be a mobile
phone, PC, etc. However, the audio player must be equipped
The Parrot PARTY is
with a jack connector or the Bluetooth profile A2DP.
detectable and ready to be
For more information, visit our website at www.parrot.com.
paired.
Streaming is in progress, but
the system has been muted
If you are using a Bluetooth-enabled audio player with your Parrot
(no sound).
PARTY you must first of all pair the two devices.
> Press + or – to return to
active mode.
The audio player is
For security reasons, the two devices must be paired. Pairing is used
to authenticate the device that you are going to use with the Parrot
connected to the Parrot
PARTY: an audio player that has not been paired cannot be used with
PARTY (Bluetooth or line-in
the system. During the pairing phase, the user must have physical
connection).
access to the device.
No device is connected.
•
•
•
for the peripherals (refer to the manual for your audio player
or to our website at www.parrot.com).
•
•
Parrot PARTY
PARTY TO AN AudIO PlAYER
ARROT
u
B
SinG an auDio player Via
luetooth
Pairing with a Bluetooth audio player
Press the Bluetooth button.
The Parrot PARTY LED starts flashing: the device is ready to be
paired.
Use your audio player's Bluetooth menu to search
When the search is complete, select «PARTY».
You are prompted to enter a PIN. Enter «0000» in your audio player.