NSK Prophy-Mate neo Manual De Instrucciones página 12

3) Wash away the cleaning powder adhering to the inside of the
powder case/powder case cap under running water. (Fig. 14)
4) Dry and assemble the powder case cover, rubber gasket and
cover holder.
CAUTION
If cleaning powder remains in the powder case, powder will
cake up, and this may cause clogging.
4-4 Lubrication
1) Dry the O-ring section of the powder case, apply a
drop of the enclosed turbine oil and rub it in with
your finger. (Fig. 15)
2) Perform autoclave sterilization.
CAUTION
If lubrication of the O-rings is neglected the joint between the powder case and handpiece may be
damaged. Powder case and handpiece may no longer swivel freely and the joint may leak.
11
Fig.14
OIL
Fig.15