NORMAL SOUNDS
Sound of Rushing Air
At the front of the unit, you may
hear the sound of rushing air
being moved by the fan
Gurgle/Hiss
Gurgling or hissing noise may
be heard due to refrigerant
passing through evaporator
during normal operation.
NOTE:
All the illustrations in this manual are for explanation purpose only. Your air
conditioner may be slightly different. The actual shape shall prevail.
AIR CONDITIONER FEATURES
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
Before you begin, thoroughly familiarize yourself with the control panel as shown below and all its
functions, then follow the symbol for the functions you desire. The unit can be controlled by the unit
control alone or with the remote.
TEMP/TIMER
ADJUSTS
TEMPERATURE
OR TIME
Auto
Low
Med
High
SETS FAN SPEED
Fan
ENERGY
SAVER MODE
Energy
Saver
CHECK FILTER
RESET BUTTON
Check
Filter
REMOTE SIGNAL
RECEPTOR
UNIT CONTROL
High Pitched Chatter
High efficiency compressors
may have a high pitched chatter
during the cooling cycle.
DISPLAYS
TEMPERATURE
OR TIME OR ERROR CODES
ADJUSTS
TEMPERATURE
OR TIME
Auto
Cool
TEMP SENSOR INDICAT
Dry
Temp
Sensor
Fan
SETS MODE
Mode
On Off
SLEEP MODE
Timer
Sleep
ACTIVATES
TIMER
TURNS UNIT
ON OR OFF
TO TURN UNIT ON OR OFF:
Press
ON/OFF button tot urn u nito n o r o ff.
NOTE:The uni t wi l l ini tia te a utomatically the Energy
Saver function under C ool, Dry, Auto(only Au to-Cooling
and Auto-Fan) modes.
TO CHANGE TEMPERATURE SETTING:
OR
Press
/
temperature setting.
NOTE:Press or hold either UP( ) or DOWN ( ) button
until the desired temperature is seen on the display.
This temperature will be automatically maintained
anywhere between 62 F(17 C) and 86 F(30 C). If
you want the display to read the actual room
temperature, see To Operate on Fan Only section.
8
Vibration
Unit may vibrate and make noise
because of poor wall or window
construction or incorrect installation.
Pinging or Switching
Droplets of water hitting condenser
during normal operation may cause
pinging or switching sounds.
UP/DOWN button to change
O
O
O
O