Gabarron MATTIRA MAS18 Instrucciones De Instalacion Y Uso página 31

CAUTION: It is essential to confirm the power output with the use of a clamp meter
LIMITATION OF OUTPUT ON MODELS MATTIRA SYSTEM MAS18
Maximum MAXIMUM
output CURRENT
limited to: L1
18kW 26.0A
15kW 26.0A
12kW 26.0A
9kW 13.0A
6kW 13.0A
3kW 13.0A
CONNECTION THREE-PHASE 3x400V~+N
LIMITATION OF OUTPUT ON MODELS MATTIRA SYSTEM MAS15
Maximum MAXIMUM
output CURRENT
limited to: L1
15kW 21.7A
13kW 21.7A
12kW 8.7A
11kW 21.7A
10kW 13.0A
9kW 13.0A
8kW 13.0A
7kW 8.7A
6kW 8.7A
5kW 8.7A
4kW -
3kW 13.0A
2kW -
CONNECTION THREE-PHASE 3x400V~+N
* The standard configuration of the boiler only allows a maximum of 12kW when connected SINGLE-PHASE 230V~.
5.3 HEATING SYSTEM FLUSHING
CAUTION: Flush the heating installation thoroughly prior to installation.
The heating system should be flushed which will remove any debris or contaminants detrimental to the operation and life of
the boiler. Any cleanser or additives used should comply with current standards and the manufacturer's instructions carefully
followed.
NOTE: IT IS IMPORTANT NOT TO USE THE BOILER PRESSURE RELIEF VALVE TO DRAIN OR FLUSH THE SYSTEM AS
TRAPPED DEBRIS WILL CAUSE INCORRECT OPERATION. A PURPOSE PROVIDED DRAIN POINT SHOULD BE USED.
MAXIMUM MAXIMUM
CURRENT CURRENT
L2 L3
26.0A 26.0A
26.0A 13.0A
13.0A 13.0A
13.0A 13.0A
13.0A -
- -
MAXIMUM MAXIMUM
CURRENT CURRENT
L2 L3
21.7A 21.7A
21.7A 13.0A
21.7A 21.7A
13.0A 13.0A
8.7A 21.7A
13.0A 13.0A
8.7A 13.0A
13.0A 8.7A
8.7A 8.7A
13.0A -
8.7A 8.7A
- -
- 8.7A
Maximum
output
limited to:
18kW*
15kW*
12kW
9kW
6kW
3kW
CONNECTION SINGLE PHASE 230V~
Maximum
output
limited to:
15kW*
13kW*
12kW
11kW
10kW
9kW
8kW
7kW
6kW
5kW
4kW
3kW
2kW
CONNECTION SINGLE PHASE 230V~
31
MAXIMUM
CURRENT
78.3A*
65.2A*
52.2A
39.1A
26.1A
13.0A
MAXIMUM
CURRENT
65.2A*
56.5A*
52.2A
47.8A
43.5A
39.1A
34.8A
30.4A
26.1A
21.7A
17.4A
13.0A
8.7A