Tommee Tippee 1092 Instrucciones página 5

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

closer to nature®
Double electric breast pump
*For hygiene reasons this product cannot be returned once opened unless faulty.
IMPORTANT SAFEGUARDS, SAVE THESE INSTRUCTIONS.
FOR HOUSEHOLD USE ONLY.
The intended use of the Tommee Tippee Electric Breast Pump is to express milk from the breast of lactating
women. Researched and developed by specialists and breastfeeding experts to express milk for storage and
later use.
PARTS GUIDE
(See Image A)
1.
Silicone insert
2.
Horn
3.
Upper pump body
4.
Lower pump body
5.
Release tabs
6.
Diaphragm
7.
Diaphragm cap
8.
Valve
9.
Air tube
10. Single to double connector
11.
Motor unit
MOTOR FUNCTION
(See Image D)
1a. Expressing time
1b. Expressing level
1c. Battery charge indicator (displayed when operating from batteries)
2.
Slide open digital display panel to power on - level one
3.
Slide close to power off (Automatic shut off after 45 minutes)
4.
Slide open to restart
5.
Level two touch pad
6.
Level three touch pad
7.
Level four touch pad
8.
Level five touch pad
DISASSEMBLING THE ELECTRIC BREAST PUMP
1.
Unscrew bottle from lower pump body.
2.
Pull off valve.
3.
Pull air tube from upper pump body and motor unit.
4.
Press release tabs to release upper pump body and pull apart.
5.
Pull out diaphragm cap and diaphragm.
6.
Pull horn from lower pump body.
IT IS NOT ESSENTIAL TO TAKE THE SILICONE INSERT OUT OF THE HORN FOR CLEANING unless milk or dirt has become trapped inside.
If so, unclip lip from horn and pull apart.
CLEANING, STERILIZING AND MAINTENANCE
Before use ensure the breast pump has been disassembled, washed and sterilized.
The parts to be sterilized are : silicone insert, horn, upper pump body, lower pump body, diaphragm, diaphragm cap, valve,
bottle, horn hygiene cover, and milk storage lid or milk storage pods if required (as shown in image B). These components are
suitable for sterilization by steam (electric
and microwave), boiling, or cold water tablet/ liquid solution. Follow the sterilizer manufacturer's instructions.
Do not sterilize: single to double connector, air tube, motor unit and adapter. Wipe clean only with a damp cloth (as shown in image C).
Always wash the product immediately after use to remove milk residue.
Wash all products to be sterilized in warm soapy water and rinse in clean water or use a dishwasher.
Do not clean with solvents or harsh chemicals.
Do not allow product to come into contact with oil based foods (e.g. oil/ tomato based sauces) as staining will occur.
Inspect the air tube before and after each use for condensation. Allow to air dry before next use.
To clean the valve, rub gently between your fingers in warm soapy water – do not insert objects as damage could result.
Routine maintenance includes cleaning. No other servicing is required.
12. 5 oz bottle
13. 9 oz bottle
14. Horn hygiene cover (combines as bottle stand for 5 oz bottle only)
15. Air tube socket
16. Electric adapter socket (from mains)
17. Milk storage lid
18. 2oz & 4oz milk storage pods and tray
19. Bottle bag (holds 4x 9oz bottles with milk storage lids)
20. Breast pads
21. Battery
22. Adapter

Publicidad

Tabla de contenido
loading

Tabla de contenido