Assembling Vacuum Cleaner - URSUS TROTTER UT-KRAFT Manual De Usuario Y Letra De Garantía

3. Before you start using the vacuum cleaner, please
remove large or sharp objects from the floor in order
to prevent that the paper filter is damaged.
4. When you want to pull the plug from the wall
contact, please do this at the plug itself and not by
means of the electrical cable.
This vacuum cleaner is equipped with a plug and a
cable which rolls up automatically.
If anything gets damaged, both the plug and the
cable must be repaired by a qualified repairman or
electrician.

ASSEMBLING VACUUM CLEANER

Always remove the plug from the power socket
before fitting or removing accessories!
1. Connecting vacuum cleaner
1) Fitting the flexible hose
Fitting:
Insert flexible hose into the air intake duct
on the top of appliance. Press until it clicks
into position.
Removing:
Removing the plug from
the power socket. To release
the flexible hose firmly from
the air intake duct.
2).Fitting the extension tubes and accessories
a. Fitting the extension tube to the handle.
handle
Extension Tube
b. Fitting the extension tubes.
c. Fitting the brush to the extension tube.
Extension Tube
Floor Brush
d. Fitting Floor brush
I deal for the daily cleaning on carpets and hard
floors.
2. Cleaning tools use
The crevice tool and dusting brush are stored on the
accessories holder.
1) Crevice tool:
Clean on the carpet
Clean on the hard floor