Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
General information
Measures must be taken to ensure that built-under and built-in units that are
subsequently re-sited as free-standing appliances cannot topple over. This can
be achieved by bolting the dishwasher to the wall or fitting it under a continuous
work surface which is screwed to the adjacent cupboards.
Information on comparability tests implemented in
compliance with EN 50242
Appliance loaded in accordance with
standard specifications.
Example of loaded dishwasher: See Fig
1*2 and 3
Capacity: 12 place settings
Comparability programme: Light wash
Rinse-aid setting: 5
Detergent: prewash- 5g
mainwash- 25g
When testing the washing performance ,it is required that the top wheel of upper
besket lies in the rolling way.
If the comparability tests do not comply fully with EN 50242, e.g., degree of soiling,
type of dishes and cutlery, etc., contact the appliance manufacturer before starting
the test.
1
fig.2
1
4
4
1
4
1
2
1
1
3
3
3
1
3
4
5
EN
4
4
4
1
4
4
4
4
4
4
1
2
2
2
2
2
2
1
5
2
2
2
1
2
2
2
3
3
3
1
3
3
3
3
3
3
1
fig.1
fig.3
34
Publicidad
Capítulos
Tabla de contenido
