NSK Ti-Max Z45L Manual Del Operador página 6

4-2 To Remove the Bur
Depress the Push Button firmly and remove the bur.
NOTICE
Grip the handpiece while placing your thumb tip on the Push Button which makes it easier to depress the button.
CAUTION
· Always insert the bur all the way into the chuck.
· Remove the bur only after the handpiece has completely stopped rotating.
· Always keep the bur shank clean.
· Entry of debris into the chuck, via the bur shank, could cause bur rotation slip and also prevent the bur from being securely located in the
chuck.
· Do not rotate the handpiece without a bur in the chuck. The handpiece may result in overheating which could cause a burn injury.
5