Displayed Symbols - Midland Alan HP450 2A Rugged Manual De Instrucciones

3.2 displayed symbols

The transceiver has an LCD display that continuously displays information on the operating status of the radio.
Symbol Meaning
Battery charge
Strength of the received and
transmitted signals
Radio/multifunctional channel
Multifunctional indicator
LO Low TX power
Keyboard lock
CTC CTCSS
dCS dCS
SCAN Channel scan
P Priority channel
dW dual Watch
Roger bip
VOX e-VOX
6
description
Indicates the charge level of the battery.
According to the number of bars displayed:
• Reception mode - Indicates the level of the received signals
• Transmission mode- Indicates the level of the output power.
In standby these large digits indicate the currently selected radio channel. During the programming of
features, they are used to display different parameters or values (for example bP = Beep that confirms
that a key has been pressed).
During programming, it is used to display different values and parameters.
For example on stands for ON (enabled feature) and oF stands for OFF (disabled feature).
Indicates that a low transmission power has been selected.
Indicates that the keyboard has been locked.
Indicates that the currently used channel has been programmed with a CTCSS tone.
Indicates that the currently used channel has been programmed with a DCS code.
Indicates that the SCAN (automatic signal scan) is in progress on the preset channels.
Indicates that the currently selected channel has been programmed as a priority channel during the
scan.
Indicates that the Dual Watch (fast search of signals on two channels) is in progress.
Indicates that the Roger bip function has been enabled.
Indicates that the e-vox (enhanced Voice Operated eXchange – handsfree transmission) has been
enabled.