AXXAIR SCOOL-700 Instrucciones Originales página 5

INNOVATIVE ORBITAL SOLUTIONS
Specifications
The SCOOL-700 must be connected to a SAXX-200 to work (no autonomous functioning)
o Max. pressure : 5 bars
o Cooling power according to norm CEI60974-2: 0,7 kW.
o Liquid fittings : Female shut-off fitting of serie 21
o Coolant : Do not use water but only AXXAIR coolant
o Tank capacity : 1,2 liters maximum
o Maximum flow : 2,2 liters/minute
o Flow security : < 0,6 l/min
Maintenance:
Regular maintenance guarantees the safety and reliability of your equipment.
Maintenance must be performed by qualified personnel only. Only qualified electricians should remove the
cooling system housing.
Cleaning the Cooler:
The cooling system takes in the ambient air of the workshop in which it operates. Some particles can
become trapped in the cooling system and this can significantly reduce the performance of the cooler. To
remedy this, remove the cover on the top of the cooler and vacuum away any soiling using the proper
equipment.
Change the coolant once a year.
Warning: The coolant must be treated as a chemical.
Environmental protection:
AXXAIR packing materials are 100% recyclable. Worn out mechanical parts and electrical equipment
contain large quantities of valuable raw materials that can be recycled.
For European countries only: Do not discard electrical equipment with household waste! Pursuant to
Directive 2002/96/EC on the recovery and safe disposal of Waste and Electronic Equipment (WEEE) and
transposition of the directive into national law, electronic equipment must be collected separately and
recycled in an environmentally safe manner.
Join experience
/
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363
0,5 liters minimum
330B Route de Portes Les Valence - ZI Les Bosses - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - Fax: +33 475 575 080 - commerce@axxair.com - www.axxair.com
- 5 -
English