Wayne Dalton 9100 Instrucciones De Instalación Y Manual Del Propietario página 13

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4
Installing Q.I. Jamb Brackets
Measure the length of the vertical tracks.
Tools Needed:
Using the jamb bracket schedule,
None
determine the placement of the jamb
brackets for your door height and track
type. To install the jamb brackets,
align the twistlock tab on the quick
install jamb bracket with the quick
install feature in the track and turn the
bracket perpendicular to the track so the
mounting fl ange is toward the back (fl at)
leg of the track.
DOOR
HEIGHT
6'0" 64" TRACK
(1626 mm)
6'5" 69" TRACK
(1753 mm)
6'8" 72" TRACK
(1829 mm)
7'0" 76" TRACK
(1930 mm)
7'3" 79" TRACK
(2007 mm)
7'6" 82" TRACK
(2083 mm)
7'9" 85" TRACK
(2159 mm)
8'0" 4 SECTIONS
88" TRACK (2235 mm)
8'0" 5 SECTIONS
88" TRACK (2235)
5
IMPORTANT: RIGHT AND LEFT HAND IS
Tools Needed:
ALWAYS DETERMINED FROM INSIDE THE
None
BUILDING LOOKING OUT.
NOTE: For door section identifi cation see
page 4.
TorqueMaster
are marked right and left hand. Uncoil the
counterbalance cables and make sure you
place the right hand cable loop on the right
hand milford pin and place the left hand
cable loop on the left hand milford pin.
Insert a roller into bottom bracket of the
bottom section and insert another roller
at #1 end hinge at the top of the bottom
section. Repeat for other side.
NOTE: Verify astragal (bottom seal) is
aligned with door section. If there is more
than 1/2" excess astragal on either side,
trim astragal even with door section.
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
JAMB BRACKET SCHEDULE
1ST SET
2ND SET
JAMB BKT
POSITION
JAMB BKT
POSITION
QIJB - 5
MIDDLE
QIJB - 6
BOTTOM
QIJB - 3
BOTTOM
QIJB - 6
QIJB - 3
BOTTOM
QIJB - 6
QIJB - 3
BOTTOM
QIJB - 7
QIJB - 3
BOTTOM
QIJB - 5
BOTTOM
QIJB - 3
BOTTOM
QIJB - 5
BOTTOM
QIJB - 3
BOTTOM
QIJB - 5
BOTTOM
QIJB - 3
MIDDLE
QIJB - 6
QIJB - 3
BOTTOM
QIJB - 7
Drums
®
counterbalance drums
LEFT SIDE SHOWN
TWISTLOCK TAB
3RD SET
JAMB BKT
POSITION
NOT APPLICABLE
MIDDLE
NOT APPLICABLE
MIDDLE
NOT APPLICABLE
TOP
HOLE
TOP
NOT APPLICABLE
QIJB - 6
BOTTOM
MIDDLE
HOLE
QIJB - 6
BOTTOM
QIJB - 6
BOTTOM
BOTTOM
TOP
QIJB - 7
MIDDLE
HOLE
TOP
QIJB - 8
TOP
QUICK INSTALL FEATURE
LEFT HAND TORQUEMASTER
®
COUNTERBALANCE DRUM
BOTTOM
SECTION
COUNTERBALANCE
CABLE
MILFORD PIN
ASTRAGAL
RIGHT SIDE SHOWN
3RD SET HOLES
2ND SET HOLES
QI JAMB BRACKET
1ST SET HOLES
#1 END HINGE
(HINGE TUBE)
BOTTOM
SECTION
ROLLERS
BOTTOM BRACKET
BOTTOM
SECTION
13

Publicidad

Capítulos

Tabla de contenido
loading

Productos relacionados para Wayne Dalton 9100

Este manual también es adecuado para:

94009600

Tabla de contenido