Accessories; Magnetic Tape; Limit Switch Magnets Bml-Z0006 (Bam0139); Connection Cable For Bml - Balluff BML-SB/C/E0-Q-M4-0-KA Serie Manual De Instrucciones

BML-S _ B/C/E0-Q _ _ _ -M4 _ _ - _ 0-KA _ _ /KA _ _-S284
Incremental Magnetic Linear Encoder
9

Accessories

Accessories are not included in the scope of delivery and
must be ordered separately.
9.1

Magnetic tape

For a complete technical description and assembly
instructions for magnetic tapes and rotative magnetic
tapes (magnetic rings), see the separate user's guides at
www.balluff.com/downloads-bml.
9.2

Limit switch magnets BML-Z0006 (BAM0139)

The magnets may be used with or without a housing. The
housing can be precisely positioned using the slotted holes
(Figure 9-1). The housing only has one magnet on the side
near the sensor.
The space-saving magnets can be bonded without a
housing or fastened with brackets provided by the
customer. The top side is marked with a groove.
If the emergency stopping distance exceeds the length of
the limit switch magnets, several magnets may be lined up
(for assembly, see section 4.3).
Included in scope of delivery:
– 2 magnets with housing
– 2 magnets without housing
– 1 assembly instructions
Fig. 9-1: Magnet and housing
20 english
9.3 Connection cable for BML-...-KA_ _-S284
BCC M41C-0000-1A-169-PS0C08-020-C009
(BCC09MW)
– M12, 12-pin, 2 m
BCC M41C-0000-1A-169-PS0C08-050-C009
(BCC09MY)
– M12, 12-pin, 5 m
BCC M41C-0000-1A-169-PS0C08-100-C009
(BCC09MZ)
– M12, 12-pin, 10 m
BCC M41C-0000-1A-169-PS0C08-150-C009
(BCC09N0)
– M12, 12-pin, 15 m
BCC M41C-0000-1A-169-PS0C08-200-C009
(BCC09N1)
– M12, 12-pin, 20 m
~44
Fig. 9-2: M12, 12-pin
Pin assignment, see Tab. 4-1 to Tab. 4-3.
9.4

Guided magnetic tape linear encoder

Sensor guide consisting of a BML-R01-M_ _ _ aluminum
rail to hold the magnetic tape and a BML-C01
(BAM01MF) slide with gliders to guide the sensor head.