Silhouette curio Manual De Instrucciones página 56

Selecting the Platforms and Preparing the Base
The Curio can accommodate a wide range of materials by adding or removing platforms. The Curio
comes with 4 platforms (marked with either a '1' or a '2'). For common material types, the Silhouette
Studio® cut settings will indicate which combination of platforms you should use (for example, a
platform setting of '3' would require both a #1 platform and a #2 platform since 1+2=3).
Once you have determined the appropriate combination of platforms, place them onto the base
over the snap posts. Place your mat on top of the platforms and secure everything together with the
snaps.
tool storage slots
Replacing Snaps: If a snap needs to be replaced,
it can be exchanged with one of the replacement
snaps provided with your Curio.
To do so, simply remove the old snap by pinching
the feet together on the underside of the base
and pulling the snap out. Next, insert the new
snap (with the feet closest to the outside edge
of the base being inserted first). Finally, rock the
snap into place so that the two inner feet lock
into the base.
Getting Started with Silhouette Curio™
8