Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Z_
WARNING:
Some dust created by using power tools contains chemicals
known to the State of California to cause cancer and birth defects or other
reproductive harm. Some examples of these chemicals are:
, Lead from lead-based paints.
o Crystalline silica from bricks and cement and other masonry products.
oArsenic and chromium, from chemically treated lumber.
Your risk from these exposures
varies, depending upon how often you do
this type of work.To
reduce your exposure
to these chemicals:
, Work in a well-ventilated area.
oWork with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
Avoid prolonged contact with dust from power sanding,
sawing,
grinding,
drilling and other construction
activities,
Wear protective clothing
and wash
exposed
areas with soap and water. Allowing dust to get into your mouth, eyes, or
lay on the skin may promote absorption of harmful chemicals.
/_, WARNING:
Use of this tool can generate and/or disburse dust, which
may cause serious and permanent respiratory
or other injury. Always use
NIOSH/OSHA approved
respiratory protection appropriate
for the dust exposure.
Direct particles away from face and body.
ADDiTiONAL
RULES
FOR SAFE OPERATION
i z_ WARNING:
BE SURE to read and understand all instructions. Failure to
|
1
follow
all instructions listed may result in electric shock, fire and/or serious
J
personal
injury.
1. Know your drill/driver.
Read operator's
manual carefully. Learn the applications
and limitations, as well as the specific potential hazards related to this tool. Following
this rule will reduce the risk of electric shock, fire or serious injury.
2. ALWAYS wear safety glasses or eye shields when using this drill/driver.
Everyday eyeglasses have only impact-resistant
lenses; they are NOT safety glasses.
3. PROTECT your lungs. Wear a face mask or dust mask if the operation is dusty.
4. PROTECT your hearing. Wear appropriate personal hearing protection during use.
Under some conditions noise from this product may contribute to hearing loss.
5. SAVE THESE INSTRUCTIONS.
Refer to them frequently
and use them to instruct
others who may use this tool. if someone borrows
this tool, make sure they have
these instructions also.
10
This product has been shipped completely
assembled.
1. Carefully remove the Storage/Carrying
Bag with Drill/Driver
and Battery
Pack,
Charging
Stand/Transformer
and Screwdriver
Bits from the box.
2. Make sure that all items listed in the packing list are included.
3. Inspect the tool carefully to make sure no breakage or damage occurred during
shipping.
4. Do not discard the packing material until you have carefully inspected and
satisfactorily
operated the tool.
5. If any parts are missing, return to the nearest Sears store or other Craftsman outlet
to have the Drill / Driver replaced.
Drill / Driver with Battery Pack
PACKING
LiST (Fig.l)
Ct"t.' ',"T1aosformer
_RRFTSM
_,
2 Double Ended
Screwdriver Bits
(stored on Drill/Driver)
Storage / Carrying
Bag
(51/2-in. Circular Saw with
Blade is shown in saw
manual)
Operator's
Manual
/_ WARNING:
If any parts are missing
do not operate this tool until the
missing parts are replaced. Failure to do so could result in possible serious
personal injury.
/_ WARNING:
Do not attempt to modify this tool or create accessories
not
recommended
for use with this tool. Any such alteration or modification
is misuse
and could result in a hazardous condition
leading to possible serious personal
injury
Z_ WARNING:
To prevent accidental
starting
that could cause serious
personal injury, always remove the battery pack from the tool when
assembling
parts.
11
Publicidad
Tabla de contenido
