Inglesina TRILOGY Instrucciones De Uso página 24

ATTACHING THE HOOD
Fasten the press studs to the bassinet structure.
Wrap the hood (C1) around the handle, fastening it by means of the press studs.
HANDLE AND HOOD ADJUSTMENT
simultaneously.
ATTACHING THE APRON
Fasten all the apron buttons to the bassinet.
MAINTENANCE OF THE INTERNAL LINING
It is recommended to remove the internal lining periodically to provide for its
correct maintenance.
PUSHCHAIR SEAT
ATTACHING THE PUSHCHAIR SEAT TO THE CHASSIS
Attach the pushchair seat to the chassis, in correspondence of the housings on
both sides of the structure.
use.
The pushchair seat can be used in rear facing and forward facing position, and the
chassis can be folded with the pushchair seat attached.
DETACHING THE PUSHCHAIR SEAT FROM THE CHASSIS
Press the handles (R5) simultaneously and lift the pushchair seat off the chassis.
CAUTION: do not, under any circumstance, carry out this operation with the baby
inside.
ADJUSTING THE BACKREST
the backrest to the desired position.
ADJUSTING THE FOOTREST
To lower the footrest, use both levers (R7) positioned on the lower part and
simultaneously press them downwards.
To lift the footrest, simply pull it upwards and it shall automatically lock into
position.
SAFETY BELTS
Ensure that the safety belts are inserted in the eyelets at the height of the shoulders
Make sure that the back strap is properly inserted in the ends of the waist one.
Fasten the ends of the strap belt to the central buckle.
The waist strap must always pass through the side loops (R8) and, when being
properly.
CAUTION! Failure to comply with this precaution can cause the baby to fall or
slide out, with serious injury risks.
ATTACHING THE HANDRAIL
Mount the handrail (R1) by pressing the buttons (R9) and attach it in correspondence
24
C4)
R6) and bring