Inglesina QUAD PRO Istrucciones De Uso página 24

ATTACHING THE APRON
Fasten all the apron buttons to the bassinet.
MAINTENANCE OF THE INTERNAL LINING
It is recommended to remove the internal lining periodically to provide for its
correct maintenance.
QUAD PRO PUSHCHAIR SEAT
ATTACHING THE PUSHCHAIR SEAT TO THE CHASSIS
Attach the pushchair seat to the chassis, in correspondence of the housings on
both sides of the structure.
use.
The seat can be used facing the mother or facing the street.
DETACHING THE PUSHCHAIR SEAT FROM THE CHASSIS
Press the handles (R5) simultaneously and lift the pushchair seat off the chassis.
CAUTION: do not, under any circumstance, carry out this operation with the baby
inside.
ADJUSTING THE BACKREST
the backrest to the desired position.
ADJUSTING THE FOOTREST
Press both buttons (R7) on the lower part of the footrest and push it down.
To lift the footrest, simply pull it upwards and it shall automatically lock into position.
SAFETY BELTS
Ensure that the safety belts are inserted in the eyelets at the height of the shoulders
Make sure that the back strap is properly inserted in the ends of the waist one.
Fasten the ends of the strap belt to the central buckle.
The waist strap must always pass through the side loops (R8) and, when being
properly.
CAUTION! Failure to comply with this precaution can cause the baby to fall or
slide out, with serious injury risks.
ATTACHING THE HANDRAIL
Mount the handrail (R1) by pressing the buttons (R9) and attach it in correspondence
of the relative housings on the pushchair seat (R10).
(R9
ATTACHING THE HOOD
rear coupling points (H4).
Complete the assembly of the hood (R2) by inserting the second coupling (H2) in
place.
24
H1) into place on the backrest of the seat (R11),
R6) and bring
H3) into the