Description Of The Kit; Safety Notices; Optional Module Description; Connection Cable - WEG RS-232 Guia De Instalacion

1. DESCRIPTION OF THE KIT

Contents:

2. SAFETY NOTICES

ATTENTION!
Switch off the Soft-Starter SSW-07/SSW-08 before installing the RS-232 Kit.
The electronic boards have components that are susceptible to
electrostatic discharge. Never touch any of the electrical components
or connectors without following the proper grounding procedures. If it
is necessary to do so, touch the grounded heatsink or use a suitable
grounded wrist strap.

3. OPTIONAL MODULE DESCRIPTION

The RS-232 kit is connected directly to the Soft-Starter.
It is fitted into the front cover slot for optional plug-in modules.
NOTE!
For more information refer to the SSW-07/SSW-08 Parameter Programming
and to the Serial Communication manual, available on the CD that
comes with the Soft-Starter or at WEG's web site (www.weg.net).

4. CONNECTION CABLE

The connection cable can be acquired in several models. The RS-232 Kit
does not include any cable.
2
Table 1 - Contents of the Kit
SSW-07/SSW-08 RS-232 Kit (Part number: 10194168)
Quantity
1 RS-232 optional plug-in module
Table 2 - RS-232 Connection Cables
RS-232 Connection Cables
Description
3m RS-232 Connection Cable
10m RS-232 Connection Cable
Description
Part number
10050328
10191117