Fisher&Paykel GC36 Guia Del Usuario página 13

Repositioning the pan supports
GC901 models
The Flip top wok support goes in the center
over the wok burner. The other two pan
supports are interchangeable but need to be
rotated to match the rounded corners of the
base insert and the burner sizes.
Rounded corners
Correct pan support orientation - GC901 models
Re-assembling your wok burner
Each part of your wok burner has locating pins to help you to assemble it correctly after cleaning.
Incorrect assembly can cause dangerous irregular flames and ignition problems. Refer to this
diagram for the correct order of assembly. Note: The brass parts of your wok burner will change
color with use. This is normal and will not affect performance.
GC36 models
The pan supports above the wok burner are
different from the other burners. Note the
raised area for the wok on the pan support.
Correct pan support orientation - GC36 models
(GC901M Iridium models only)
Inner cap
Outer cap (small holes)
Trim ring
Vent ring with locater pins
(large holes)
Align and insert pin
Raised area on wok support
Side view
Rotate vent ring to align locater
pin with hole in burner base.
US
11