Moving The Appliance; Measures At The End Of Operation - Hupfer TE-2/V19-26 Manual De Instrucciones

Chapter 5
Page 34
5.3.3

Moving the appliance


Turn off the thermostat.

Switch off the appliance with the On / Off switch.

Pull out the mains plug and insert it into the plug park provided.

Release both total brakes.

Grip the appliance by the push bars and move it to the destination.

At the destination, apply both total brakes in order to secure the appliance against movement.

Insert the mains plug into a suitable earthed socket.

Switch on the appliance with the On / Off switch.

Set the desired temperature using the thermostat.
5.4

Measures at the End of Operation

WARNING
Mobile appliances

At the destination, apply both total brakes in order to secure the appliance against movement.

Turn off the thermostat.

Switch off the appliance with the On / Off switch.

Pull out the mains plug and insert it into the plug park provided.
Built-in appliances

Switch off the appliance with the On / Off switch.
Plate dispenser
TE-2/V19-26, 27-33 | TE-2/VK19-26 | TEH-1/V19-26, 27-33 | TEH-2/V19-26, 27-33 | TEUH-1/VS19-26 | TEUH-2/VS19-26, 27-33 | TEUH-2/VC19-26
EBR/V19-26, 27-33 | EBRH/V19-26, 27-33 | EBRH-2/V19-26
Risk of hot surfaces
The internal surfaces of the appliance and the base plates can become hot
during operation and only cool down slowly in the air.
For cleaning, allow the appliance to cool down sufficiently with the cover re-
moved and wear suitable protective gloves.
Operation
Measures at the End of Operation
4330000_A3