System Specifications - TRUE METRIX GO Guía De Prueba Rápida

If meter does not turn on, open Battery Tray and check that the battery
was inserted with the "+" side facing up. Close Battery Tray and
repeat Step 5. If meter still does not turn on, call 1-800-803-6025,
Monday - Friday, 8AM-8PM EST.
Caution!
Batteries may explode if mishandled. Do not dispose of battery in fire.
Do not take apart or attempt to recharge battery. Dispose according to
local regulations.
5. Turn meter back over
Battery is not rechargeable. If you have a cable or a cradle for
and press Set Button to
downloading results to a computer, DO NOT plug the USB cable end into
turn meter on.
an electrical outlet. Trying to recharge the battery or power the meter
by plugging into an electrical outlet will cause meter to catch on fire or
melt.
Time and date settings may need to be reset after changing the battery.
See Time/Date Set Up on pages 40-41 to re-set time and date.
56
System Specifications
Result Range: 20-600 mg/dL
Sample: 0.5 microliter (0.5 µL) Fresh capillary whole blood from the fingertip
Test Time: Results in as fast as 4 seconds
Result Value: Plasma equivalent values
Assay Method: Electrochemical
Power Supply: One 3V lithium battery #CR2032 (non-rechargeable)
Battery Life: Approximately 1,500 tests or 2 years
Automatic shut-off: After two minutes of non-use
Weight: 0.58 ounces
Size: 1.6" x 1.4" x 0.85"
Memory Size: 500 results
Operating Range (Meter & Test Strips):
Life of the meter: 5 years
Life of the lancing device: 3 years
Chemical Composition
TRUE METRIX Test Strips: Glucose dehydrogenase-FAD (Aspergillus species), mediators, buffers and stabilizers.
TRUE METRIX Control Solution: Contents: water, d-glucose, buffers, viscosity enhancing agent, salts, dye
and preservatives.
Relative Humidity: 10%-90% (Non-condensing)
Temperature: 41°F - 104°F
Hematocrit: 20%-70%
Altitude: Up to and including 10,200 feet
Use within specified environmental conditions only.
57