Controls; Gearchange Lever - Betamotor RR 400 Manual De Instrucciones

1
5 6
4
3
2
1
GB
A
B
2
3
4

CONTROLS

CLUTCH LEVER
Clutch lever 1 is fitted to the left-hand side
of the handlebars. Screw A can be used
to alter the home position of the lever (see
Adjustments).
1
FRONT BRAKE LEVER
Front brake lever 2 is fitted to the right-
hand side of the handlebars. Screw B can
be used to adjust the home position of the
lever (see Adjustments).

GEARCHANGE LEVER

Gearchange lever 3 is fitted to the left side
of the engine.
The positions corresponding to the differ-
ent gears are shown in the figure.
The neutral position is between the 1
2 nd gears.
BRAKE PEDAL
Brake pedal 4 is located in front of the
right-hand footrest.
The position of the pedal can be adjusted
to suit the requirements of the driver (see
Adjustments).
88
and
st