Betamotor RR 400 Manual De Instrucciones página 92

1
CLOCK CLK FUNCTIONS
It indicates hours and minutes from 0:00 to
23:59 :59
In order to set the clock, it is necessary to
select the screen 2 and hold down the
SCROLL pushbutton for approximately three
seconds. After this time has elapsed, the
desired hour can be selected by pressing
the SCROLL key.
When the pushbutton is released after three
seconds, the instrument panel will automati-
cally shift to the minutes. Select the minutes
by pressing repeatedly the SCROLL
pushbutton.
TRIP ODOMETER TRIP FUNCTION
It indicates the distance travelled from the
last resetting.
Maximum indication: 999.9 km
This parameter can be reset on screen 3 by
pushing and holding down the SCROLL key
for approximately 3 seconds.
Remark:
The information from this function is lost when
the battery is disconnected or tension drops
below 6V.
STP CHRONOMETER FUNCTION
It indicates a range from 0 to 99:59.99
(Minutes:Seconds.Hundredths of a second)
This counter is controlled by pressing (once
the function is displayed) the SCROLL key
for approximately 0.5 second.
1st Push: function activation
2nd Push: counters are stopped
3rd Push: STP reset
4th Push: function activation
5th Push: counters are stopped
and so on ....
Remark:
The information from this function is lost when
the battery is disconnected or tension drops
below 6V.
GB
92