Starter Button; Indicator Switch; Side Stand - Betamotor RR 400 Manual De Instrucciones

STARTER BUTTON

Starte button 1 is located on the right-hand
side of the handlebars and operate the
electri engine starter. Push the button until
the engine sterts.
Do not press the button 1 while the engine
is running.
LH SWITCH
Dip switch 2 has three positions:
A = lights off
B = low beam on
C = high beam on
Button 3 operates the horn.
Switch 4 is used to stop the engine. Press
the button until the engine stops.

INDICATOR SWITCH

Shifting lever 5 left or right activates the
left or right indicators (if installed). When
released, the lever returns to the central
position. Press it to turn the indicators off.
KICKSTART
Kickstart 6 is fitted to the right-hand side of
the engine.
The upper part of the kickstart can be ori-
ented.

SIDE STAND

Press down side stand 7 with the foot and
lean the vehicle against it.
Ensure that the ground is solid and the ve-
hicle stands steadily.
If the vehicle is used off-road, the closed
stand can be further fastened by means of
rubber band 8.
2
3
93
1
4
4
5
6
8
7
GB