Function Buttons - Ariston TELECOMANDO MEMORY Manual Del Usuario

GB

FUNCTION BUTTONS

1. ON/OFF button
Press it to turn the air conditioning unit
on and off.
2. MODE button
Selects the operating mode, according to
the following sequence:
> AUTO > COOL > DRY > HEAT > FAN
AUTO (AUTOMATIC)
COOL
DRY (DEHUMIDIFICATION)
HEAT
FAN
3. SWING button
It is used to adjust the direction of the
fl ap. By keeping it pressed for more than
two seconds, the automatic swing func-
tion is started or stopped.
4. SWING button
with this function)
It is used to adjust the direction of the hor-
izontal defl ectors. By keeping it pressed
for more than two seconds, the automatic
swing function is started or stopped.
5. SLEEP/EYE button
It activates and deactivates the SLEEP
function. By keeping it pressed for more
than 2 seconds, the "INTELLIGENT EYE"
function is activated (in the models fi tted
with this function); to deactivate it just
keep the button pressed for more than 2
seconds again.
NOTE: Once activated, the SLEEP func-
tion mode is cancelled.
6. TURBO/SELF CLEAN button
It activates and deactivates the TURBO
function. By keeping it pressed for more
than 2 seconds, the automatic clean-
ing is activated; to deactivate it just keep
the button pressed for at least 2 seconds
again.
20
(in the models fi tted
auto cool dry heat
SET TEMP. TIMER ON OFF
silence sleep follow me lock
1.
TEMP
2.
MODE
3.
SWING
4.
SWING
5.
SLEEP
EYE
TURBO
6.
SELF
CLEAN
7.
LOCK
fan
run
F
8.
9.
10.
SILENCE
11.
FAN
SPEED
12.
TIMER
13.
MEMORY
LED
14.
FOLLOW
ME
RESET
15.