General Safety Rules; Safety Instructions - S&P HTB-75 N Manual De Instalacion E Instrucciones De Uso

ENGLISH
Installation Manual and Operating Instructions
aution : For safe operation and installation, read all instructions carefully
C
Neither the manufacture nor the manufacturer's agent/distributor nor the retailer from whom
this product was purchased shall be in anyway responsible for any loss or damage of whatever
nature caused by the installation of this product

SAFETY INSTRUCTIONS

GENERAL SAFETY RULES

To ensure the success of the Ceiling Fan's installation, be sure to read the following general safety
To ensure the success of the Ceiling Fan's installation, be sure to read the
rules before begining .
following general safety rules before begining.
1- The Ceiling Fan installation should be carried out by a qualified electrician.
1.- The Ceiling Fan installation should be carried out by a qualified electrician.
2- To ensure a correct installation, be sure to read the instructions and review the diagrams thoroughly
2.- To ensure a correct installation, be sure to read the instructions and re-
before commencement.
view the diagrams thoroughly before commencement.
3- All electrical connections must be carried out in accordance with local codes and regulations, or
3.- All electrical connections must be carried out in accordance with local codes
the national Electrical Code. If you are unfamiliar with the installation of electrical wiring, secure
and regulations, or the national Electrical Code. If you are unfamiliar with the
the services of a qualified electrician.
installation of electrical wiring, secure the services of a qualified electrician.
4.- Before connecting the device, ensure that electrical supply and frequency
4- Electrical supply 230V AC 50 Hz
coincides with the technical dates indicated in technical plate.
5- These apparatus must be earthed.
5.- These apparatus must be earthed.
6.- The method of disconnection from the mains supply must incorporate a
6-The method of disconnection from the mains supply must incorporate a switch or isolator with a
switch or isolator with a minimum contact separation of 3 mm. on all poles.
minimum contact separation of 3 mm.on all poles.
7.- Make sure that when the fan is fitted in the chosen position there is not
7- Make sure that when the fan is fitted in the chosen position there is not possibility of the rotating
possibility of the rotating blades coming into contact with any object.
blades coming into contact with any object. Blades should be at least 2.30 m from floor when fan
Blades should be at least 2.30 m from floor when fan is hung.
is hung.
8.- If you are installing more than one ceiling fan make sure that you do not
mix fan blade sets, even though they are from the same ceiling fan model.
8-If you are installing more than one ceiling fan make sure that you do not mix fan blade sets, even
though they are from the same ceiling fan model.
9.- Before beginning, disconnect power by removing fuse or turning off cir-
cuit breaker.
9-Before beginning, disconnect power by removing fuse or turning off circuit breaker.
10.- Once fan installation is completed make sure that all connections are
secure to prevent fan from falling.
10-Once fan installation is completed make sure that all connections are secure to prevent fan from
falling.
11.- Do not insert anything into the fan blades when ceiling fan is operating.
12.- This appliance can be used by children aged from 8 years and above and
11-Do not insert anything into the fan blades when ceiling fan is operating.
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruc-
tion concerning use of the appliance in a safe way and understand the
IMPORTANT NOTE : The warnings,safeguards and instructions given in this manual are not
hazards involved. Children shall not play with the appliance. Cleaning and
exhaustive and do not nessecarily cover all eventualities. It must be understood that common sense,
user maintenance shall not be made by children without supervision.
caution and care are factors which cannot be built into any product. These factors must be supplied
13.- Cleaning and maintenance to perform by the user not be made by chil-
by the person(s) caring for and operating the unit.
dren without supervision.
.
10
9