Troubleshooting; Problems, Possible Causes And Solutions - THINK GIZMOS TG23 Manual De Usuario

6. TROUBLESHOOTING

6.1 Problems, Possible Causes and Solutions

PROBLEM
The Pulsator is too slow.
The Pulsator does not
rotate
Abnormal Noise and
vibration.
Water leaks from the wash
tub
Spin-dry basket does not
rotate
The spin tub or wash tub do
not drain.
POSSIBLE CAUSE
Power Cut or Switched Off
Transmission belt not
attached correctly.
Belt pully has become
loose.
Pulsator is blocked.
Belt is loose
The clothes in the spin dry
tub are unbalanced.
Hairpins, Coins or metal
items were left in clothes.
The wash tub or spin tub
are overfilled.
There is something
jammed between the
pulsator and the wash tub.
Drain hose was not
properly connected.
The spin select switch is in
loose contact.
The fixed screw of the
spin dry basket or shaft
coupling is loose.
The shaft of the spin
dry basket is tangled by
textiles.
Brake dragline is loose.
Something has dropped
into the space between
spin tub and spin dry
basket.
The drain hose has become
blocked.
The drain location is above
the machine.
8
SOLUTION
Switch the power on.
Assemble the transmission belt.
Tighten the belt.
Remove the blockage.
Tighten the belt or renew it.
Replace the clothes in the tub
making sure it they are pushed
down and level with the Spin
Cap on.
Check to see if any hairpins etc
were left in clothes and have
become loose in the wash tub.
Remove some of the items from
the tubs.
Removed the jammed object(s)
Reconnect and tighten the hose.
Adjust the contactor of the
switch.
Tighten the screw.
Remove the textile.
Tighten the dragline.
Remove the object.
Check the drain hose and clear
any blockage.
This machine is drained by
gravity, so either move the
machine to above drain area or
please buy a small home pump.