Spracht AURA SOHO Manual De Instrucciones página 16

seconds, the backlight will come on; when the backlight starts flashing,
you may release the CONF button.
Enter the new Conference Center Phone Number. The maximum number
of digits you can enter is 16, the minimum is 3. This number will be stored
in memory.
Press the HOLD button, and the number will be stored. The next time
that you press the CONF button, the number you entered will be dialed
automatically.
If you want to exit without saving the new number, press the MUTE
button, and you will return to normal "On Hook" phone operation.
If you ever want to return to the factory default number, press the FLASH
button. Any custom number that was previously entered will be erased,
and you will exit and return to normal "On Hook" phone operation.
Exceptions: If you try to enter more than the maximum number of
digits, the backlight will flash 4 times and no additional numbers will be
accepted.
There is a 5 minute built in timer for entering the new number. If the 5
minute limit is reached, the process will exit automatically and no data will
be stored. The phone will return to normal "On Hook" operation.
The FLASH button
The FLASH button allows you to dial a number and when that party
comes on the line, you can put them on "Hold" by pressing the FLASH
button, and dial a second number. When the second party comes on the
line, you press the FLASH button again to have both parties on the line
for a three way conference call.
There is a Region Code that must match the area of the world where
you use the conference phone. The Region Code is preset at the factory.
However, if your FLASH function doesn't work as stated in the User Guide,
please call your local Service Center or Spracht directly. A Customer
Service representative will be able to advise you on how to modify this
code, if necessary.
13