Settings - Offset - Tomahawk Coach By Color Manual De Instrucciones

The Offset setting is required, if:
• Work has been carried out on the drive, e.g. adjusting the belt tension, replacing the
belt or other drive parts.
• An exclamation mark (!) is shown instead of the wattage.
SELECT OFFSET IN THE
SETTINGS MENU
CADENCE DISPLAY
If the Offset measurement fails and a red screen is displayed, please follow the instructions in
this manual.
SETTINGS
– OFFSET
TURN RESISTANCE DIAL
TO THE MINIMUM
POSITION
STOP PEDALING
INSTRUCTION
PEDAL CADENCE OF
OVER 100 RPM & LET
FLYWHEEL RUNDOWN
PERFORMING
CALCULATION
CADENCE DISPLAY (NO
MOVEMENT)
OFFSET SUCCESSFUL
15