Checking Electrodes Placement; About Us - Gima ECG300G Manual De Uso

Rhythm
strip
General Average
setup QRS
Auto-Diag
Periodic
Advanced Print&Save
setup
Note: Auto strip, Rhythm strip, Average QRS, Auto-Diag, Periodic are available when
"Auto" or "Rhythm" print mode is selected.

13.12 Checking Electrodes Placement

Select button on the main interface can start the lead emplace illustration interface.
This interface shows Lead placement in European standard / American standard.
Select any key can exit this interface.

13.13 About Us

Select button in the main interface can start the information interface related to this
instrument.
This interface shows the instrument name, version, company name, copyright and company
contact detail.
User Manual
10Sec/15Sec/20Sec/25Se
c/
30Sec
[2*6]/[2*6+Mark]/[3*4]/
[3*4+Mark]/[4*3]/
[4*3+Mark]/[None]
All/Data/Conclusion/None
[per1Min]/[per2Min]/
[per3Min]/[per5Min]/
[per10Min]/[per20Min]/
[per30Min]/[per60Min]/[off]
[Print and Save]/ [Print no
Save]/ [Save no Print]
Under the print mode is "Rhythm 2", "Rhythm 3"
Or "Rhythm 4", the system will use the select
option as the print time length of rhythm strip.
Under the print mode is "Rhythm" Or "Auto", the
system will use the select option as the default
print style of average QRS.
The auto-diagnose contains 2 parts of data and
conclusion, user can print one of them only as his
wish.
The system will print ECG periodically in the select
time interval, If the option of print mode is selected
as "Manual", the system will print in "Auto3 * 4 +
1". Otherwise, the system will print in selected
mode.
In case sampling, user could choose to print or
save the case
29