Warning And Safety Instructions - Kinetec Spectra XL Manual De Empleo

2.

Warning and safety instructions

WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
Kinetec Spectra XL™
The machine must be installed and commissioned according to the information
provided in this manual.
If you need any assistance in the assembly, use or maintenance of the device,
please contact your Kinetec
The practitioner determines the protocol and ensures its proper implementation
(settings, session duration and frequency of use).
Run a cycle with the device unloaded before installing the patient on the
machine.
For optimum safety, always give the hand control to the patient before starting the
system. The patient must know the start/stop/reverse function on the hand control,
see page 7.
To avoid the parameters being changed, lock the machine's hand control before
giving it to the patient, see page 7.
Danger, risk of explosion: Do not use the machine with anaesthetic gas or in an
environment that is rich in oxygen.
Before using this machine, always check that the electrical socket is in good
condition and is suitable for the splint power supply cord. Only use the original
cable supplied with the machine. Check that the cables remain free around the
device so that they do not get damaged.
Before using this machine, always check that the machine is not damaged, in
particular the protective housings.
In case of electromagnetic interference with other devices move the device.
Please do not touch the fixed or moving parts while the unit is running: pinching or
crushing risk. Keep children and pets away from the machine.
Modifying the machine in any way is strictly forbidden.
Always check the motion parameters displayed on the hand control before
starting the device.
Only the accessories, spare parts and supplies described in this manual should be
used with this machine.
Do not connect the device to other devices not described in this manual.
The USB connector of the hand control must be connected only to a USB stick.
In case of liquid projection on the device when it is used outside its transport case,
immediately disconnect the power cord and contact your KINETEC
If unforeseen events or malfunctions occur, please contact your Kinetec
distributor.
Wireless communications devices, such as domestic wireless devices in networks,
mobile phones, wireless telephones and their base stations and walkie-talkies, may
affect the machine. You are recommended to keep at least a distance d
between these devices and the machine. See the table on page 18.
Under maximum temperature conditions mentioned in the user's manual, the
maximum temperature which can be reached by the hand control is 48.8°C.
distributor.
®
EN
distributor.
®
®
3/20