Coway aquamega 200C Manual Del Usuario página 18

03 MAINTENANCE
How To Install
Be Careful!
Where to install the water filtration unit I
Install the product in a cool part of the room, on an even surface, out of direct sunlight and away from
humidity, dust, and dripping water.
Water filtration installation location II
Keep the condenser part at the rear of the product at least 4 inches away from the wall and make sure that
the installation floor is firm.
Movement and installation
Connect power 30 minutes after installation if the device has been moved.
Cold water pipe
The tubing and the product must be connected to the cold water pipe.
(If connected to the hot water pipe, it can damage the water filter.)
After installing the water filtration device
After installing the product, dispense the ambient water for 3 minutes before using the cold water.
M ake sure that you run the ambient water to flush the filters before using the cold
water.
N OTE
 S ome of the water used for the inspection process during production may remain inside the filter. 
This product is not a secondhand product, so do not worry.
Do not reuse previously used connection valves or tubes when installing the product.
18