Troubleshooting; Safety Notices; Troubleshooting Table - CASO DESIGN SV 900 Manual De Instrucciones

From time to time (once a month) or if a bag has burst, you should perform a cleaning run
of your machine. To this end, fill clean water up to above the MIN marker line and add a
mild detergent (no foam cleaner or acidic cleaning agents). Set the temperature to 40 C
(104°F) and run the unit for 20 minutes in the normal cooking cycle. Then drain the water
completely. If necessary, repeat the cycle to clean the device
thoroughly.
Cleaning of the lid: The transparent part of the cover can be
removed and is dishwasher-proof. Never place the entire lid in
the dishwasher.

18 Troubleshooting

The following table may help you narrow down and address minor malfunctions:

18.1 Safety notices

Danger
► Only qualified electricians, who have been trained by the manufacturer may carry out
any repairs on electrical equipment.
► Improperly performed repairs may result in personal injury or damage to the device.
18.2 Troubleshooting
The device does not work:
1. Check that the cable is properly plugged into the wall socket
2. Check cable for damage.
3. Verify that the wall socket works with another device.
4. Verify that key
pressed for more than 1 second.

18.3 Troubleshooting table

The digital display is lit, but the device does not start the cooking program and displays an
error code instead:
Error Code Possible Causes
E001 1. Bin is empty
2. Water too low
3. Device is not positioned
correctly on the table
caso SV 900
(Key 1) is lit. If so, determine whether key (Key 1) has been
Solution
Fill clean water up to above the "MIN"
level.
Fill clean water up to above the "MIN"
level.
Place the device on a flat surface
36