Safety Information; Safety Warnings; Preliminary Recommendations; General Information - WEG CFW500 Guía De Instalación, Configuración Y Operación

1 SAFETY INFORMATION

1.1 SAFETY WARNINGS

NOTE!
Only use the CFW500-ENC expansion
„
plug-in module with encoder input in
CFW500 series WEG inverters.
We recommend reading the inverter user´s
„
manual before installing or operating this
accessory.
This guide contains important information
„
for the correct understanding and proper
operation of this module.

1.2 PRELIMINARY RECOMMENDATIONS

ATTENTION!
Always disconnect the general power
„
supply before connecting or disconnecting
the accessories on the frequency inverter.
Wait at least 10 minutes to guarantee
„
complete de-energization of the inverter.

2 GENERAL INFORMATION

This guide provides instructions for the installation,
configuration and operation of the plug-in expansion
module for encoder reader input CFW500-ENC.
The CFW500-ENC has two differential channels, "A"
and "B" designed up to 400 kHz incremental encoder
reader frequency. Moreover, it has a configurable +5 V
or +12 V output supply for quadrature encoder operation.

3 PACKAGE CONTENT

When receiving the product, check if the package
contains:
Accessory in antistatic packaging.
„
Installation, configuration and operation guide.
„
ENC Encoder Input Plug-in Module
CFW500 | 5