Pneumatic Connection; Pressure Supply - Baker Hughes Druck PACE 5000 Manual Del Usuario

1.1 Pneumatic Connection

WARNING
thread to ISO228/1 (DIN ISO228/1, JIS B0202) G1/8.
Tapered threads not allowed.
PACE rear
panel
PACE rear
panel
Port
Supply +, Supply -, Output,
Vent, Reference
Refer to Sales Data sheet for the complete range of adaptors.

1.2 Pressure Supply

1. The pressure supply must be clean, dry gas, nitrogen or air and at the correct
pressure, Refer to K0443, Section 6, Reference and Specification.
2. Ensure the user systems can be isolated and vented.
3. Connect pressure and vacuum supplies to the SUPPLY + and SUPPLY - connection
ports.
4. Connect the Unit Under Test (UUT) to the required outlet connection port.
4 | PACE5000/6000 Safety Instructions and User Guide-English
Parallel threads must be used. Female thread type is parallel
PACE pressure port
PACE pressure port
Thread Specification
ISO228/1 G 1/8 parallel threads (DIN ISO228/1, JIS B0202)
Parallel threads must be used.
Female thread type is parallel thread to
ISO228/1 (DIN ISO228/1, JIS B0202)
G1/8
Tapered threads NOT allowed.
© 2008 Baker Hughes, a GE company – All rights reserved.