Specifications - Peavey ESCORT 2000 Guia De Funcionamiento

Output Power: 75 Watts per channel into 4 Ohm load
Frequency Response: 30 Hz to 25 kHz +0/-3 dB measured at 1 Watt
Overload Protection: DDT
distortion that can damage speakers.
Tone Controls: Bass: 100 Hz +/- 10 dB
Treble: 10 kHz +/- 10 dB
Graphic Equalizer: 5 bands: 100 Hz, 350 Hz, 1 kHz, 3 kHz and 8 kHz
With FLS
Input Impedance: Mic Input: 2 K Ohms
Line Input: 12 K Ohms
Distortion: Less than 0.8% THD at rated output
Max Gain: 86 dB mic input to speaker output
Signal/Noise Ratio: 85 dB mic input typical
Reverb: Digital
AC Power: 115 VAC 60 Hz or
230 VAC 50/60 Hz
Weight Assembled: 57 lbs.(25.9 Kg)
Dimensions: 14.5" H x 36.75" W x 15.5" D
Speakers: Woofer 10" (254 mm)
Piezoelectric Horn Tweeter
Microphone: Dynamic, Cardioid (Unidirectional)
Escort
™ (Distortion Detection Technology) limits the power amplifier input to prevent clipping
® (Feedback Locating System)
(36.8H x 93.3W x 39.4D cm)
™

2000 Specifications:

10