Aiwa Z-HT63 Manual Del Usuario página 12

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

+,-
]_
.——
—J
——.—.
. .——.
1
2
3
Press TUNER/BAND
to select the FM or AM band.
When TUNER/BAND
is pressed while the power is off, the
power is turned on directly (Direct Play Function).
Press
TUNER
PRESET
repeatedly
to select
the
manual
tuning
mode.
Each time the button is pressed, the following three tuning
modes are selected cyclically.
@Preset tuning mode: The preset number flashes.
@Auto search mode: "SEARCH is displayed.
@Manual tuning mode: "SEARCH" is not displayed and
the preset number does not flash.
Frequency
SEARCH
Preset number
The preset tuning mode is skipped if no station is preset.
Turn MULTI JOG clockwise or counterclockwise
to tune in to a station.
The frequency changes as you turn MULTI JOG. When a
station is received, "TUNE is displayed for 2 seconds.
During FM stereo reception, [IIUDI) is displayed.
To search for a station quickly (Auto Search)
Press TUNER PRESET repeatedly to display "SEARCH" (auto
search
mode),
and
turn
MULTI
JOG
clockwise
or
counterclockwise
until the frequency starts to change rapidly.
After tuning into a station, the search stops.
SEARCH
To stop the Auto Search manually, turn MULTI JOG a little in
either direction,
The Auto Search may not stop at stations with very weak
signals.
+
DOWN and -UP
are also available to search for a
station. Keep +
DOWN or -UP
pressed until the tuner
starts searching. Press the button to stop the search manually.
When an FM stereo broadcast contains noise
Press MONO TUNER on the remote control so that "MONO"
appears on the display.
Noise is reduced, although reception is monaural.
MONO
To restore stereo reception,
press MONO TUNER so that
"MONO"
disappears and
"STEREO" is displayed for 2 seconds.
To change the AM tuning interval
The default setting of the AM tuning interval is 10 kHz/step. If
you use this unit in an area where the frequency allocation system
is 9 kHz/step, change the tuning interval.
Press POWER while pressing +
on the unit.
To reset the interval, repeat this procedure.
. u
DOWN and -UP
are also available
to
tune in to a
station.
12
ENGLISH

Publicidad

Tabla de contenido
loading

Tabla de contenido