Safety And Compliance Warnings; Warning: Fcc Rf Exposure Limits; Radio Frequency Emissions Limits In The Usa - Tait TM8100 Serie Guia Del Usuario

Safety and compliance warnings

Warning: FCC RF exposure limits

This product generates RF (radio frequency) energy during
transmissions. This device must be restricted to work-related
use in an occupational/controlled exposure environment.
The radio operator must have control of the exposure condi-
tions and duration of all persons exposed to the antenna of
this transmitter to satisfy FCC RF exposure compliance. This
device is not approved for general population use.
Please refer to the following website for more information on
what RF energy is and how to control your exposure to
ensure compliance with established RF exposure limits.

Radio frequency emissions limits in the USA

Part 15 of the FCC Rules imposes RF emission limits on elec-
tronic equipment to prevent interference to reception of
broadcast services.
This device complies with Part 15 of the FCC Rules. Opera-
tion is subject to the condition that this device does not
cause harmful interference.
4 Safety and compliance warnings
This device must only be used with authorized accessories
and antennas.
The operator must ensure that the minimum safe distance
of 0.9m (35 inches) between persons and the antenna is
maintained during transmissions.
This minimum safe distance is based on the assumption
that there is a duty cycle of 50% transmit mode to stand-
by or receive modes. The radio is in transmit mode when
the PTT (press-to-talk) key on the microphone is pressed
and the control head red LED (light emitting
diode) glows.
Website: http://www.fcc.gov/oet/rfsafety/rf-faqs.html.