Jimmy JV85 Pro Manual De Instrucciones página 10

Clean dust cup and filtration system
1. Press down the dust cup bottom cover,
open dust cup and dump dust into trash
can.
2. Hold HEPA lid and rotate anti-clockwise,
remove HEPA assembly from handheld
vacuum for cleaning.
3. Hold top of cyclone assembly and rotate
anti-clockwise, remove cyclone assembly
from handheld vacuum for cleaning.
4. If HEPA needs wash, hold the HEPA
and rotate clockwise, remove it from HEPA
lid for washing.
HEPA needs completely dry before reuse.
5. After cleaning, assemble the parts back
in the opposite sequence of disassembly.
Clean brushroll
1.Move the brushroll release button along
the arrow direction remove side cover.
2.Remove one end of the brushroll and
take it out from nozzle for cleaning.
3.After cleaning or replacing brushroll,
assemble it back in opposite sequence of
disassembly.
Battery pack disassembly
Press the battery release button, remove
the battery pack in the arrow direction and
place the battery in a plastic bag, then
store it in a dry place.
Storage of main body
When the vacuum is long idled, remove
the battery, pack the machine and store it
in a cool and dry place, do not put in direct
sunlight or humid environment.
8
17
18
19
Brushroll release
button
20
21
Battery release
button