Installing The Child Seat; General Information - Britax Child Safety GROW WITH YOU Guia Del Usuario

Britax Child Safety, Inc.

Installing the Child Seat

General Information

Harness Mode
Install forward-facing only.
DO NOT use anything to raise the child seat off of the
vehicle seat.
DO NOT install with the lower anchors for a child weighing
more than 45 lbs (20.4 kg).
Britax recommends that the top tether be used at all times
when installing the child seat. Using the top tether will
improve the stability of your child seat and reduce the risk
of injury.
• Use this child seat in harness mode with children at
least 2 years of age and who weigh between 25 and
65 lbs (11.3 – 30 kg) and who stand between 34 and
49 in (85 – 125 cm) in height. Britax recommends
using harness mode until your child outgrows its fit
requirements. See the Child Seat Fit Information section
on page 7 for more information.
• This seat may be used in
either the upright or recline
position in harness mode
(see figures at right).
8
WARNING!
Upright Position
Reclined Position