Britax Child Safety GROW WITH YOU Guia Del Usuario página 12

Booster Mode
Position forward-facing only in a seating position with a
lap-shoulder belt.
Use only the vehicle's lap and shoulder belt system when
securing a child in booster mode. Never secure a child
with a lap belt only in booster mode.
Always secure the unoccupied child seat to the vehicle
by attaching the lower connectors to the lower anchors in
the vehicle, or by fastening the vehicle seatbelt across the
unoccupied child seat.
If the lower anchors in your vehicle prevent proper vehicle
belt fit across your child you cannot use LATCH to
position this seat in booster mode. See below.
The vehicle belt fits properly when
the lap part sits low across the
child's upper thighs (B) and the
shoulder part lies across the center
of the child's chest and does not
contact the child's neck when routed
through the upper belt guide (A).
• This child seat can be used in booster mode with
children who weigh between 40 and 120 lbs (18 and 54
kg) and stand between 44 and 63 in (110 and 160 cm)
in height. Britax recommends using booster mode only
once your child has outgrown harness mode.
• This child seat cannot be in the recline position when
used in booster mode.
• This child seat can be
positioned on the vehicle
seat using the LATCH
system.
Use the vehicle's lap-
shoulder belt to secure the
child. Ensure that the LATCH
system does not interfere
with the vehicle belt function
and alignment when securing
your child.
GROW WITH YOU User Guide
WARNING!
9