Using The Impact Absorbing Tether - Britax Child Safety GROW WITH YOU Guia Del Usuario

To remove the lower connector from the storage slot
or lower anchor:
1. Press and hold the red
release button.
2. Pull the lower connector
from the storage slot or
lower anchor.

Using the Impact Absorbing Tether

Attach the tether only to tether anchors identified by your
vehicle manufacturer as tether anchorage points.
If your vehicle does not currently have a tether anchor
attachment, refer to your vehicle owner's manual or contact
your vehicle man u fac tur er for assistance. DO NOT modify
your vehicle without advice from your vehicle manufacturer.
HARNESS MODE: Britax recommends that the top tether
be used at all times when installing the child seat. Using
the top tether will improve the stability of your child seat
and reduce the risk of injury.
BOOSTER MODE: Do not use top tether without securing
lower connectors.
Tether anchor locations vary
from vehicle to vehicle. Check
your vehicle owner's manual
and look for the tether anchor
symbol shown in the diagram
to help identify where the top
tether anchor point is located
in your vehicle.
To attach the tether to a tether
anchor:
1. Remove the webbing from
the elastic strap and loosen
the tether.
GROW WITH YOU User Guide
WARNING!
OR
OR
27