Safety Information; Warnings - Britax Child Safety GROW WITH YOU Guia Del Usuario

Britax Child Safety, Inc.

Safety Information

Failure to follow all warnings and instructions
could result in SERIOUS INJURY or DEATH.
• Harness Mode: Use only with children who weigh between
25 and 65 lbs (11.3 and 30 kg) and whose height is
between 34 and 49 in (85 and 125 cm) and are at least 2
years of age.
• Booster Mode: Use only with children who weigh between
40 and 120 lbs (18 and 54 kg) and whose height is between
44 and 63 in (110 and 160 cm).
• Snugly adjust the belts provided with this child restraint
around your child.
• Secure the top anchorage strap provided with this child
seat.
• Use only the vehicle's lap and shoulder belt system when
restraining the child in this booster seat.
• Secure this child restraint with the vehicle's child restraint
anchorage system if available or with a vehicle belt.
• Follow all instructions on this child restraint and in the
written instructions.
• Register your child restraint with the manufacturer.
• Britax recommends that the top tether be used at all times
when installing the child seat. Using the top tether will
improve the stability of your child seat and reduce the risk
of injury.
• Use this child seat forward-facing only.
• This child seat must be used in upright position in booster
mode.
• In a vehicle with rear designated seating positions, vehicle
owners should be alerted that, according to accident
statistics, children are safer when properly restrained in the
rear seating positions than in the front seating positions.
To ensure your child's safety, please study Vehicle Seat
Positions on page 37 and consult your vehicle owner's
manual.
• To prevent injury due to deterioration or hidden damage,
discontinue use of this child seat when it is older than nine
(9) years or has been in a moderate or severe crash. See
expiration date on Serial Number and Manufactured Date
Label located on the child seat shell. See page 3.
• Always make sure the child restraint system is secured to
the vehicle, even when unoccupied, since in a crash an
unsecured child restraint system may injure occupants.
The unoccupied child seat can be secured to the vehicle
by attaching the lower connectors to the lower anchors in
the vehicle, or by fastening the vehicle seatbelt across the
unocuppied child seat.
4
WARNING
FIT REQUIREMENTS
INSTALLATION
GENERAL USAGE