Alcad PAK-51010 Manual Del Usario página 5

2 - W I R E D O O R E N T R Y S Y S T E M S
ACTIVATING THE ELECTRIC LOCK FROM THE ENTRANCE PANEL
On the main screen, press the key marked . The message “Door opening” will appear on the screen. Next, enter one of the door-opening
codes previously configured. When the correct code is entered, the electric lock will be activated for the period of time which has been configured
while a confirmation message will be shown simultaneously on the screen.
Code not correct
Door-opening code
THE LOOPED AUTO-SWITCH-ON FUNCTION. 2-WIRE VIDEO DOOR ENTRY SYSTEM
The auto-switch-on function makes it possible to see the image on the monitor, communicate with the entrance panel and open the door without
having received a call.
In installations with several points of entry this function can be activated sequentially in the different entrance panels of the installation (looped
auto-switch-on), by repeatedly pressing the auto-switch-on button. Thus (See picture below), when the auto-switch-on button is first pressed,
the main entrance panel will be activated (P); then, as the button is pressed again and again, each of the secondary entrance panels of the
building will be activated in turn (S1,S2,S3,S4,S5), until eventually the loop is completed and the main entrance panel is activated once again.