Celestron POWERSEEKER 127AZ Guía De Instalación Rápida página 5

Using THE
Smartphone Adapter
1
Open the eyepiece clamp and place it around the body of
the eyepiece. Tighten the clamp until it is secure.
4
Loosen the knob on the bottom of the adapter that secures
the phone clamp to the eyepiece clamp. Slide the phone
clamp up and down and rotate it left and right until your
camera is looking down through the eyepiece of the
telescope. Tighten the knob on the bottom of the adapter
to secure it in place.
4 | E NG LISH
2
Use the phone clamp knob to open the phone holder
until your phone fi ts inside. Tighten it to secure your
phone in place.
5
Use the telescope's focuser to adjust the focus of your
camera. Snap the image or record video using your
camera app.
3
Turn on the phone and open your camera app. Make sure
the fl ash is turned off.