Dyna-Glo DGB730SNB Manual De Usuario E Instrucciones De Funcionamiento página 22

Step 22: Insert the charcoal pan (21) into the support rails on the
bottom of charcoal grill body.
Step 23: Secure gas hose and LP gas hose holder (30) assembly onto
cart left side panel assembly (13) by tightening one M4x12
screw (D) and one M4 nut (F) into hole into cart left side table.
NOTE: The LP gas hose holder (30) must completely circle
the gas hose before securing onto cart left side panel (13)
as illustrated.
Hardware Used
D M4x12 Screw
F M4 Nut
Step 24: Open the cart door assembly (15 & 14) and insert the LP gas
cylinder (sold separately) into the nesting hole located in the
bottom shelf (1). Align the hand screw coupling of the
hose/regulator with the threaded valve of the cylinder by
turning the LP gas cylinder until positioned correctly. Hand
tighten the hose/regulator coupling to the threaded valve of
the LP gas cylinder. Tighten the tank screw until the cylinder
is secure inside the nesting hole of the bottom shelf (1).
Dual Fuel Grill
ASSEMBLY INSTRUCTIONS
Qty: 1 pcs
Qty: 1 pcs
20
22
23
D
13
30
24
1
Rotate the tank screw clockwise.
21
F