Disposal Information - MIRKA CEROS Manual De Instrucciones

Proper Use of Tool
This sander is designed for sanding a variety of materials e.g. wood, composites, plastics, etc. using
abrasive discs designed for this purpose. Do not use this sander for any other purpose than that
specified without consulting the manufacturer or the manufacturer's authorized supplier. Do not
press on the shroud when sanding. Pressing on the shroud will reduce its lifespan. Do not use back-
ing pads that have a working speed less than 10,000 RPM free speed. The cooling air vents on the
housing must always be free of blockages to ensure air circulation. Any maintenance or repair work
requiring the motor housing to be opened may only be carried out by an authorized service center.
For optimum results, use sander in conjunction with a dust collection system.
Work Stations
The tool is intended to be operated as a hand held tool. It is always recommended that the tool
should be used when standing on a solid floor. It can be in any position but before any such use, the
operator must be in a secure position having a firm grip and footing and be aware that the sander
can develop a torque reaction.
Disposal Information
Danger!
Disposal information for the old appliance! Render redundant power tools unusable by removing
the power cord. Only for EU countries. Do not dispose of electric tools together with household
waste material! In observance of European Directive 2002/95/CE, 2002/96/EC + 2003/108/CE on
waste electrical and electronic equipment and its implementation in accordance with national law,
electric tools that have reached the end of their life must be collected separately and returned to
an environmentally compatible recycling facility.
6