Controls And Instrument Panel - Lander 55 Manejo Y Cuidado

21.The operator must check if every part of the tractor and, especially the
safety devices, are in good working condition and perform to specs. They
should be kept in perform working condition. If you note any defects or
malfunctioning, fix or repair them in good time. If necessary contact your
nearest Goldoni Assistance Centre. Failure to observe these instructions will
release the manufacturer from all liability.

2. CONTROLS AND INSTRUMENT PANEL

See Fig.1.
1 Light switch.
2 Ignition switch.
3 Mileometer/Tachometer (see also Fig.12).
4 Indicator switch.
5 Hand throttle.
6 Machine identification plate.
7 Steering clutch disengage lever.
8 Parking brake lever.
9 Brake pedal.
10 Reverse lever.
11 Creep gear range lever.
12 Gear lever.
13 PTO engage lever.
14 Hydraulic lift lever.
15 Gearbox dipstick and filler plug.
16 PTO clutch lever.
17 Gearbox clutch pedal.
18 Seat distance regulating lever
19 Seat comfort regulating knob
20 Fuel filler plug
21 Fuse box
See fig.12
1 Battery charger indicator light - red
2 Engine oil pressure indicator light - red
3 Air filter clogged indicator light - red
4 PTO engaged indicator light - red
5 Radiator water temperature gauge
6 RPM meter hour counter
7 Green turn indicator light
8 Blue driving beam indicator light
9 Green dipped beam indicator light
10 Yellow fuel reserve indicator light
11 Fuel level gauge
12 Parking brake engaged and steering clutch indicator light - red
46